Test and Replace A Wheel Hub ~ The wheels are usually mounted on the hub of the wheel. In a vehicle suspension, the center is a central element. The hub also holds the top arms control and bottom together. The caliper and brake rotor are located in the center which holds the wheel in place. Defective blocks are dangerous and can lead to detach the vehicle wheel. You will need a wheel jack, dial indicator, tire wrench, jack, breaker bar and socket wrench.
1. If after driving for ten miles, the hub is very hot
or very hot due to friction, replace the hub.
2. Use a wheel jack to lift the vehicle from the ground. Spin the wheel to use their hands. If the hub is rough and produces a sound, then it is worn.
3. Rotate the hand to check
"play" on the wheel. 'Play' is the ability to swing the wheel. Shake
the wheel, keeping it in 6:12 hours. The hub should have no play. Play the
wheels means that the hub is defective.
4. Repeat step judder removal after tire and brake assembly. When the tire and assembly are removed, it is easier to tell if the hub is defective. Any abnormal noise or movement means that the hub is defective.
5. Attach one clock at the base of the wheel. You have to replace the hub if the dial reads more than.004.
6. Before changing the wheel hub, see the manuals vehicles. To change the wheel hub, use a tire wrench to loosen the wheel nuts wheel 45 degrees to the left.
7. Under the securing welds before located under the front driver's seat and passenger ports of Jack is on underside.Remove wheel vehicle wheel hub after removing all nuts.
8. In the center of the wheel hub, pull the bolt and use a breaker bar and socket wrench to remove the axle nut.
9. Use a jack to support the hub of the wheel and the lower control arm.
4. Repeat step judder removal after tire and brake assembly. When the tire and assembly are removed, it is easier to tell if the hub is defective. Any abnormal noise or movement means that the hub is defective.
5. Attach one clock at the base of the wheel. You have to replace the hub if the dial reads more than.004.
6. Before changing the wheel hub, see the manuals vehicles. To change the wheel hub, use a tire wrench to loosen the wheel nuts wheel 45 degrees to the left.
7. Under the securing welds before located under the front driver's seat and passenger ports of Jack is on underside.Remove wheel vehicle wheel hub after removing all nuts.
8. In the center of the wheel hub, pull the bolt and use a breaker bar and socket wrench to remove the axle nut.
9. Use a jack to support the hub of the wheel and the lower control arm.
11. Install a new wheel hub using the above steps in reverse order.
That some test and replace a wheel hub, automotive greetings.
0 komentar