Clean Your Homemade Kegerator ~ Now That You Have Spent a little time and money, and your kegerator is up and running you Need to take very good care of it. There are special dog kegerator CLEANING KITS you purchase, for around $ 25.00 or so.
Over a Period of time your bottle lines, fittings, and taps Will Become Covered in "calcium oxalate" which is a chemical compound That forms crystals, and starts to scale up on the inside of you bottle lines, taps, and fittings. If you do not clean your kegerator bacteria will grow very Quickly, Problems Causing a number of Different taste like bottle, foaming, or the worst make people sick.
All That You Need to do is buy a bottle cleaning kit to get started, They will come with step-by-step instructions.
1} You will Need to turn off and disconnect the CO2 regulator, Then disconnect the keg coupler form the keg, disconnect the Hoses from the regulator and the coupler, and Then take off your tap and faucet from the kegerator. Take the Hoses you removed from the regulator, and the keg coupler and put the ends in a bucket.
2} You will Also Need to combine some water and cleaning solution together in a bowl. (Also take the drip tray and clean it in there also)
3} In the cleaning kit you will Have A quart plastic jug and a tap. Here you will combine your cleaning solution and water together in the plastic quart jug. Connect the cleaning the jug to the faucet shank on your Homemade kegerator.
4} Pump the cleaning solution-through the Hoses and in the bucket. After You are finished, do it again But with clean water. You will want to do this a couple of times to Be sure the lines are clean.
0 komentar